Dellorto Carburator 19/19mm SHB Vespa PTS
- Product Code: 00773
- 00773
- Weight: 640g
- Dimension: 120mm x 100mm x 132mm
Stok produk kosongUntuk sementara produk ini tidak dijual. Jangan kuatir, produk akan segera kami perbarui.
$121
Deskripsi Produk
The SHB series is the classic among scooter carburettors. On nearly every small frame this successful carburettor type was used.
The very easy to adjust carburettors are available with diameters up to 19mm. The passage is sufficiently dimensioned, in order to make also engines with 112 ccm sufficiently mixture available. Due to their very identical design, independent of the carburettor cross section, these carburettors are optimally suited to fit a larger version of the V50, PK50, for example, which are equipped with a 16mm carburettor as standard.
Attention: To a larger carburettor belongs inevitably also another intake manifold since the carburettors have another clamping width apart from another inside diameter.
Carburettors | |
---|---|
size venturi: | 19 mm |
size main jet: | 74 |
main jet type: | Dellorto 5mm (1486) |
size pilot jet: | 45 |
idle jet type: | Dellorto SH (3360) |
size choke jet: | 60 |
power jet: | |
size slide: | 7938.1 |
slide type: | flat slide |
choke type: | manual, cable |
mounting type air filter: | with studs |
connection size air filter: | 51.5 mm |
mounting type intake manifold: | clamp-connection |
connection size intake manifold: | 23.1 mm |
idle gas screw: | on top |
fuel/air mixture screw position: | right hand side |
fuel hose position: | left hand side |
connection size fuel hose: | 7 mm |
height: | 122 mm |
width: | 80 mm |
depth: | 72 mm |
connection height (relative): | 44 mm |
fitting type: | M6 x 0.75 |
material float chamber: | plastic |
connector for oil hose: | |
vacuum connection: | |
OEM numbers (for comparison purposes only) | |
Piaggio | 196228, 151976, E.4092, E4092 |
DellOrto | 00773 |